× Kiểm tra đơn hàng

Cảm biến chênh áp 608-11

  • Sản phẩm
  • Thương hiệu:
  • Giá:
    Liên hệ
  • Sản xuất tại:
    Mỹ
  • Mã HH:
    608-11
  • Đơn vị tính:
    Cái
  • Chọn số lượng:
Tổng quan về sản phẩm
Ranges Down to 0.1" w.c., FM Approved, NEMA 4X
Intrinsically Safe Differential Pressure Transmitter using an ultra thin silicon diaphragm that enables precision measurement of pressures.
 
Features
  • High accuracy at low pressure ranges provides exceptional measurement for ensuring tight-control and minimizing costly out of specification conditions
  • Intrinsically safe for use in the specified hazardous locations meets specifications where pressure transmission and safety cannot be compromised
  • NEMA 4X rated enclosure provides protection in harsh environments permitting outdoor monitoring or in areas where dust and particulate matter exists
Product Applications
  • Lab Fume Hood Control
  • Clean Room Applications
  • Flow Measurements & Controls
  • Filter Monitoring
  • Furnace Draft Measurement
  • Process Control
Specifications
  • Service: Clean/dry air and compatible combustible gases (see Agency Approvals for FM ratings).
  • Wetted Materials: Consult factory.
  • Accuracy: ±0.5% or ±0.25% full scale.
  • Stability: ±0.5% F.S./yr.
  • Pressure Limits: 100 psig (6.89 bar); 15 psid (1.03 bar).
  • Temperature Limits: -20 to 185°F (-28 to 85°C).
  • Compensated Temperature Range: 0 to 160°F (-18 to 71°C).
  • Thermal Effect: 0.5% Accuracy: ±0.02% F.S./°F; 0.25% Accuracy: ±0.01% F.S./°F.
  • Power Requirements: 12 to 36 VDC (2-wire).
  • Output Signal: 4 to 20 mA DC.
  • Zero and Span Adjustments: Potentiometers for zero and span.
  • Response Time: 250 ms.
  • Loop Resistance: DC: 0 to 1045 Ω maximum.
  • Electrical Connections: Screw terminals: two 1/2" female NPT conduit.
  • Process Connections: Two 1/4" female NPT.
  • Enclosure Rating: NEMA 4X (IP65).
  • Mounting Orientation: Not position sensitive.
  • Weight: 2 lb (0.9 kg).
  • Agency Approvals: FM approved intrinsically safe for use in Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III, Div. 1 when wire with approved intrinsically safe barrier. Entity parameters: Vmax=36 VDC; Imax=250 mA; C=12 nF; L=0 mH.
Thông số kỹ thuật
Tài liệu tham khảo
Tiêu đề Link download
Series 608 Catalog Page Series 608 Catalog Page
Yêu cầu báo giá
THÔNG TIN HỖ TRỢ
Nhân viên tư vấn:
- Miền Bắc: Lê Tố hơn
  + Điện thoại: 0827.077.078
  + Email: hon@vietphat.com
 
- Miền Nam: Dương Thế Tri
  + Điện thoại: 0829.077.078
  + Email: tri@vietphat.com
 
Tổng đài hỗ trợ chung:
   + Điện thoại: 02871 077 078
   + Email: sales@vietphat.com
TIN TỨC LIÊN QUAN
Đăng ký nhận email khuyến mãi Vui lòng nhập email của bạn để nhận được thông tin khuyến mãi
Hotline:
0829.077.078
Ngoài giờ:
0827.077.078
Yêu cầu báo giá